Product Detail
Home > Products > Core Blower Machine Series
  • Model No: PN1A02S-21B
  • Technical parameters:
  • 1、Controlled by PLC control unit
    2、Running: Air pressure transmission
    3、Operation : Manual, semi-automatic, full automatic(having conveyer belt)
    4、Power: It can be selected, having heated pipes 12pcs×1200W in each side
    5、Able to select dry status cores or wet status cores in a multi-cavity core mold.
    6、Heated by electric elements, automatic constant temperature (moveable& static mold can control temperature singly).
    7、Automatic core mold cleaning for shooting sand side of die
    8、mold engage stroke:300mm
    9、Ejection stroke:30mm(moveable mold adopts mechanical and
    static mold pulled by tank)
    10、Core-pulling function: standard route:150mm& adjustable
    11、Max focus distance of entering material’s hole: 320mm
    12、Having two safety doors
    13、Fixing floodlight inside the machine
    14、Operation’s tension of air pressure: 0.5~0.7Mpa
    15、Min. cycle time in theory: 30~60 seconds
    16、Max weight of the core mold: 4000g
    17、Heating board size: 350×220×60mm
    18、Max. mold size: 400×250×110mm
    19、Distance between the two heating boards: 460mm
    20、Slow-start device for keeping the machine stability
    21、Alarm for low working pressure
    20、Machine dimension: 3600×900×2400mm 
Your Name: E-mail:
You can Log in or Register for more function!
Inquiry for this Item:
Copyright @ 2009 ORIENO PRECISION HARDWARE CO.,LTD. All Rights Reserved.