1. device: PLC control 2. operation: hydraulic system transmission, water cooling test cooling system (1 hydraulic main pump system can control 3 casting machines). 3. pouring function: inclined pouring, inclined positioning casting, horizontal pouring. The 4. mode and the open die have the function of reducing speed. 5. casting speed and time adjustable: tilt casting angle 0-85 degrees. 6. take the corner angle: when the level is 0 degrees, tilt 85 degrees, two choices; upper die pick. (open the mold at the same time, synchronize the ejection, synchronize the upper die with the upper die and take the workpiece again. 7. die cooling time can be adjusted. It can be partitioned for cooling and has 6 air ports (No. 1~6). 8. mold fixed seat size: 1000*600*80mm. (5 trough of press plate) 9. the maximum weight of the mold: 1800kg. 10. power: 11KW. 11. the maximum mode stroke: 700mm. 12. the maximum distance between the two sides of the fixed plate: 1200mm. 13. the minimum distance between the two sides of the fixed plate: 500M. 14. model force: 6300kg. 15. tank volume: 250L. 16. working oil pressure: 40-50kg/cm2. 17. curing time: adjustable. 18. casting process time can be displayed. 19. mold temperature exceeds the upper and lower limit, the mold can not be closed. 20. there are mold water cooling pipe installation system, each inlet and outlet of the upper and lower die, (the equipment inlet and outlet and the connection pipe with the mould are supplied by the customer). 21. there is a mold heating system. There are four groups of heating modes, which can be divided into four sections. 22. net weight of equipment: about 4800KG 20. machine specification: 4060*2120*1950
Copyright @ 2009 ORIENO PRECISION HARDWARE CO.,LTD. All Rights Reserved.